Would you like to know if your mobile is original or not ?????

Press the following on your mobile *#06# and the-international mobile equipment identity number appears. Then check the 7th and 8th numbers:

IF the Seventh & Eighth digits are 02 or 20 this means your cell phone was assembled in Emirates which is very Bad quality

IF the Seventh & Eighth digits are 08 or 80 this means your cell phone was manufactured in Germany which is fair quality

IF the Seventh & Eighth digits are 01 or 10 this means your cell phone was manufactured in Finland which is very Good

IF the Seventh & Eighth digits are 00 this means your cell phone was manufactured in original factory which is the best Mobile Quality

IF the Seventh & Eighth digits are 13 this means your cell phone was assembled in Azerbaijan which is very Bad quality and also dangerous for your health

What a hack-y afternoon. Here are some more secret iPhone codes for you to enjoy. After realizing that the *3001#12345#* was a familiar Nokia code, I decided to spend some time googling for other phone codes that might work on the iPhone.

These (mostly) do. There are more. Feel free to add your own to the comments.

*3001#12345#* and tap Call. Enter Field Mode.Field mode reveals many of the inner settings of your iPhone, specifically up-to-date network and cell information.

*#06# Displays your IMEI. No need to tap Call.IMEI is the unique identifier for your cell phone hardware. Together with your SIM information it identifies you to the provider network.

*777# and tap Call. Account balance for prepaid iPhone.

*225# and tap Call. Bill Balance. (Postpaid only)

*646# and tap Call. Check minutes. (Postpaid only)These three are pretty self explanatory.

*#21# and tap Call. Setting interrogation for call forwards.Discover the settings for your call forwarding. You’ll see whether you have voice, data, fax, sms, sync, async, packet access, and pad access call forwarding enabled or disabled.

*#30# and tap Call. Calling line presentation check.This displays whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.

*#76# and tap Call. Check whether the connected line presentation is enabled or not.State whether the connected line presentation is enabled or disabled. Presumably similar to the calling line presentation.

*#43# and tap Call. Determine if call waiting is enabled.Displays call waiting status for voice, data, fax, sms, sync data, async data, packet access and pad access. Each item is either enabled or disabled.

*#61# and tap Call. Check the number for unanswered calls.Show the number for voice call forwarding when a call is unanswered. Also show the options for data, fax, sms, sync, async, packet access and pad access.

*#62# and tap Call. Check the number for call forwarding if no service is available.Just like the previous, except for no-service rather than no-answer situations.

*#67# and tap Call. Check the number for call forwarding when the iPhone is busy.And again, but for when the iPhone is busy.

*#33# and tap Call. Check for call control bars.Check all the usual suspects (voice, data, fax, sms, etc) to see whether barring is enabled or disabled for outgoing.

This is only for Landline Phones.

Register Secret Code

Suppose you want to make 5555 your secret code. Follow this procedure to register this:
Dial 123 5555 5555 then wait for the acceptance tone then disconnect. Your code is registered.

Change secret code

Suppose you want to change current code 5555 to 4444 then Dial 123 5555 4444 then wait for the acceptance tone then disconnect. Your new code(4444) is registered.

Bar/Open Facilities using Secret Code(example 5555)

Bar STD/ISD calls lockedDial 124 5555 1 then wait for the acceptance tone then disconnect. Now STD/ISD calls will be barred .

Open STD/ISD calls unlockedDial 124 5555 0 then wait for the acceptance tone then disconnect. Now STD/ISD calls can be made.

Open STD calls only unlocked Dial 124 5555 3 then wait for the acceptance tone then disconnect. Now STD calls can be made.

Bar STD/ISD/manual trunck calls locked Dial 124 5555 2 then wait for the acceptance tone then disconnect. Now STD/ISD/manual trunck calls will be barred . (It will also bar calls to 95 level).

Bar local calls locked Dial 124 5555 4 then wait for the acceptance tone then disconnect. Now localcalls will be barred .(applicable only if STD Facility is available).

Open local calls only unlocked Dial 124 5555 1 or 2 then wait for the acceptance tone then disconnect. Now Local calls can be made.

Press menu then * for secret menuIMEI number:511,#

Flash eprom menu:511,#

SP unblock menu:511,#
To enter extended secret menu on Sagem just type last 7 numbers of IMEI and * on the end then Ok.
Now enter secret menu and you will see RAM,Network and test network submenus added.

To switch silent mode on simply press and hold *

IMEI number:* # 0 6 #

Software version:* # 0 6 #

Net Monitor:0 0 0 0 0 0 *

Type 000000* for how much the battery is discharged.

Phone restarts itself:###337*07#

View IMEI:* # 06 #
Default language English:* # 0044 #

JDefault language Deutch:* # 0049 #

NetMonitor1 activate:hold * enter 4329

NetMonitor2 activate:hold * enter 621342

Enter into M4 Test mode:hold * enter 5472

Show SW version:hold * enter 5806

Show HW version:hold * enter 5807

Show SW and HW version:hold * enter 936505

NS Lock Menu:hold * enter 476989

CP Lock Menu:hold * enter 482896

NS Lock Menu:hold * enter 574243

SP Lock Menu:hold * enter 967678

IMSI Lock Menu:hold * enter 362628

Lock net.level:hold * enter 787090

Lock net.level:hold * enter 787292

Shut Down:hold * enter 3926

*#06# -> Displays imei

*#2254*# -> Status Register: C, BS, RR, MMI, CREAT

*#2255*# -> Activate & Deactivate the “DEBUG CALL”-

*#2558*# -> The time in days, hours & minutes you are connected to the net

*#2562*# -> Not Clear; the phone reconnects to the net

*#2565*# -> Not Clear; Warmstart?

*#3333*# -> (NO) BLOCKING – list (15 Items)

*#2377*# -> “BEER”: not clear, the phone waits a random time and reconnects to the
net,sometimes the phone makes a reset

*#3377*# -> Init, Flags, SIM LCK

*#3353*# -> Resets the (NO) BLOCKING – list

*#7378*# -> Name, Length, SIM phase

*#7489*# -> SECURITY CODE

*#7693*# -> You can activate & deactivate the SLEEP MODE (when deactivated the battery will go down)

*#7787*# -> Not clear: SPURIOUS INTERRUPT

*#7948*# -> SWITCH OFF: not clear; it is a timer or something

*#8463*# -> Some information about the SLEEP MODEPhilips Genie (TCD838)

*#2337*# -> Will activate the beep signal when the cellphone reconnected to the net

*01763*8371# (*01763*VER0#) — Firmware Version.

*01763*3641# (*01763*ENG1#) — Enable Engineer Mode hold pwr key to leave then disable.

*01763*3640# (*01763*ENG0#) — Disable Engineer Mode.

*01763*8781# (*01763*TST1#) — Test #1 (test early wdt looping to dump, need to remove battery from phone)

*01763*8782# (*01763*TST2#) — Test #2 (test irq dis looping to switch, resets itself)

*01763*8783# (*01763*TST3#) — Test #3

*01763*8784# (*01763*TST4#) — Test #4

*01763*8785# (*01763*TST5#) — Test #5

*01763*87872# (*01763*TST72#) — Test #7

*01763*8788# (*01763*TST8#) — Test #8

*01763*5640# (*01763*LOG0#) — Disable LOG

*01763*5641# (*01763*LOG1#) — Enable LOG

*01763*4634# (*01763*IMEI#) — IMEI

*01763*6370# (*01763*MEP0#) — Disable MEP menu (unlock menu)

*01763*6371# (*01763*MEP1#) — Enable MEP menu (unlock menu) (go to
settings,security,meplocks select insert handset code,default is 0000, allows to check lock status and disable locks only if u have correct code dont try guessing!!)

*01763*63866330# (*01763*NETMODE0#) — Disable NetMode

*01763*63866331# (*01763*NETMODE1#) — Enable NetMode

To connect the O2 customer care free of charge, dial 4444 for the top up line, it will ask you to press 1 to continue but don’t, press 2 instead and it will divert you to the customer care free of charge.

Send the keyword on to 212 it will text you back with your email address. When you want to send e-mail to someone, just put their address at start of the text message, leave one space then put your message in and send it to 212 . You can recieve e-mail via sms as well.

Instead of typing in *#10# to get your balance you can type #10# – *10# – #*10# etc.

Voicemail number is 901.

When phoning a turned off 02 mobile, press * then 8705 if they haven’t changed their code you can listen 2 voice mail and change their greeting.

To hide your number while texting (only 02 network n Nokia phone) go 2 the messages menu select create e-mail, it will ask for an e-mail adress, enter t@t, enter a subject, write the msg than send. It will ask e-mail server number, enter the number of your friend and send! Call him if he’s got your number.

When roaming, type *#111# or *#111*# to to call home from abroad.

Cell broadcast code 200 displays the local phone codes.

Type in *0# (star zero hash) before your text msg 2 get confirmation of delivery. Note that delivery reports should be set off.

Go to www.02.co.uk on a PC and register as a free user then after that if you want to send a txt msg visit that site and sign in and get 150 free txt messages every month.